Power over Ethernet or PoE
Power over Ethernet or PoE describes any of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras. Unlike standards such as Universal Serial Bus which also power devices over the data cables, PoE allows long cable lengths. Power may be carried on the same conductors as the data, or it may be carried on dedicated conductors in the same cable.
There are several common techniques for transmitting power over Ethernet cabling. Two of them have been standardized by IEEE 802.3. Since only two of the four pairs are needed for 10BASE-T or 100BASE-TX, power may be transmitted on the unused conductors of a cable. In the IEEE standards, this is referred to as Alternative B. Power may also be transmitted on the data conductors by applying a common-mode voltage to each pair. Because Ethernet uses differential signalling, this does not interfere with data transmission. The common mode voltage is easily extracted using the center tap of the standard Ethernet pulse transformer. This is similar to the phantom power technique commonly used for powering audio microphones. In the IEEE standards, this is referred to as Alternative A.Continue Reading..
From Wikipedia, the free encyclopedia
Power over Ethernet or PoE Books
Power Over Ethernet Interoperability Guide By Sanjaya ManiktalaEthernet: The Definitive Guide By Charles E. Spurgeon, Joann Zimmerman
Computer Networking According to Wikipedia: Everything you need to know on ... By Wiki NerdsNetworking Bible By Barrie Sosinsky
No comments :
Post a Comment